Wordless Wednesday #25

Throwback Thursday #20 - TH&B #71 at Smithville, ON

Somewhat a celebrity as far as diesels are concerned, TH&B #71 sits in front of the road's Smithville, Ontario station with a northbound freight sometime in the late 1970's. Scanned from a Kodak film negative from my collection (photographer unknown).

Tonight’s Throwback Thursday features a shot of TH&B #71 westbound in front of the road’s station at Smithville, Ontario. The scan is from an undated Kodak negative from my collection, purchase a few months ago at a local train show (photographer unknown). Though we don’t have an exact date for the photo, we have a reasonable idea of when the photo was taken – before February 12, 1980. That’s that date when the locomotive – famously, the first Canadian-assembled engine built at General Motors’ London, ON plant – was destroyed in a fiery collision with a tractor trailer just outside of Welland, ON. But on this date, the engine appears unaware of its’ impending fate as it heads north (geographically west) with tonnage from US connections at Buffalo or Montrose, headed for Hamilton and maybe even Toronto. Finding a set of pure TH&B power was indeed a treat, particularly in the roads’ later years when increasing corporate influence by owner CP became evident in the number of CP units powering the railway’s trains.

Smithville, 20 miles southeast of Hamilton on what is now Canadian Pacific’s Hamilton subdivision, was once the junction with the Dunnville subdivision which ran 20 miles south through its’ namesake town to the Lake Erie waterfront town of Port Maitland, and the Erco (now Innophos Canada) phosphate plant therein. Unit trains of phosphate rock from Florida (“rock trains”) were steady traffic for a number of years on the TH&B, and along with unit sulfuric acid trains, generated good business for the branch. At one time, a car ferry provided the TH&B with American connections on the opposite shore of Lake Erie. A passing siding at Smithville still exists, and is the only place between Welland and Kinnear for the CP dispatcher to meet trains now that the Vinemount siding has been removed. Also removed was the wye at Smithville with the Dunnville branch; cut back in 2001 due to several wooden bridges being in poor condition, CP elected to revive a portion of the old CASO line between Welland and the od location where the Dunnville branch crossed the CASO at grade (E&O crossing). A short connector track was built in the southeast quadrant of the crossing to join the two lines, with  service to the phosphate plant now originating out of Welland instead of Hamilton. The 9.5 miles between E&O crossing and Smithville were subsequently abandoned and removed (even the overhead steel bridge over #20 highway in Smithville was removed). Happily though, the Smithville TH&B station still stands in its’ original location to this day, carefully preserved and in good condition.

‘Til next time,

Cheers,

Peter.

Wordless Wednesday #24

Throwback Thursday #19 - CN at Rymal, Part II

Tonight's Throwback Thursday features the second half of my Dad Keith's write-up of the namesake location for this blog. Thanks again Dad!

- Peter.

As mentioned in the previous Rymal anecdote, the former Hamilton and Northwestern Railway line would cling to life into the early 1990’s, finally succumbing to abandonment in 1993. However, the line did not vanish without a final blaze of glory!

Towards the end, the lightly-traversed branchline was a bastion of venerable CNR road power, including the long serving mainstay GMD SW1200’s, GMD GP9’s as well as the occasional MLW RS-18. However, as shown above, the most noteworthy and beloved units by far were the handful of CN’s infamous remaining snow service GMD F7’s. With no on-route switching demands, the F7 A/B consists were ideally suited to the inter-plant traffic pattern requirements of ‘The Steel Company of Canada’, aka ‘Stelco’, transporting continuously-cast slabs from their newer flagship facility in Nanticoke to the rolling mills located at Hilton Works, situated on the Hamilton waterfront. For an all-too-brief period, pure A-B-A sets as shown, and on occasion F7’s mixed with GP9’s ferried 60 ft flatcars, equipped with specialized slab cradles, from lakefront (actually Hamilton Harbour/Lake Ontario) to lakefront (Lake Erie). While more than a delight for the local railfan community (See ‘F Units on the Nanticoke/CN 9100’s produced by Green Frog Productions, www.greenfrog.com shot by area enthusiast Rob McCormack), some operational concerns were voiced.  Lower city dwellers became increasingly concerned about the potential for a loaded runaway slab train descending the escarpment without brakes, careening through their community. This, despite the fact that the line had crested the geographical outcrop in the mid 1870’s and had been disaster free for well over a century! As the unlikely catastrophe dialogue was heating up, the matter was resolved by an unforeseen event when the bridge over Stone Church Road (located approximately under the trailing caboose) was displaced by an over-height transport truck – see photo below. Owing to the compromised structural integrity of the span, rail traffic was suspended south from CN’s Stuart St. yard (the alternative, much more circuitous routing, involved movement from Stuart St. yard to Brantford along the Dundas sub, then back to Caledonia to rejoin the former H&NW line). As if to add an exclamation point, the span was displaced in the opposite direction, shortly thereafter, by another unfortunate truck encounter. This time the injured bridge span was lifted and placed perpendicular on the right of way! As previously mentioned, much of the H&NW chartered line remains as the ‘STONE CHURCH ROAD RAIL TRAIL’. North of Stone Church Road the former right of way is known as the ‘ESCARPMENT RAIL TRAIL’. One can walk or ride their bike past them, but no longer does the sound of normally-aspirated 567's echo off the concrete silo walls...

- Keith.

Above: Atop the escarpment, as shown, the H&NW chartered line descended to the first station stop at Rymal. No doubt longer freight trains would have been a challenge for the hogger with part of his consist ascending and part descending at the same time! For additional information on the ‘Hamilton and Northwestern Railway’ refer to Charles Cooper’s superb manuscript entitled ‘RAILS TO THE LAKES’. Reportedly, creating the path to climb from the lower city was accomplished by Irish labourers ("navvies", displaced canal builders) over a three year period at a cost of approximately one million 1870’s dollars! A modern day remnant of their efforts is the downtown ‘Cork Town’ community, so named on account of their off duty shenanigans! Apparently construction of Hamilton’s first jails more or less accompanied the building of the H&NW!

Above: Late local area business development did generate a limited amount of additional activity on the line. Shown on the below are CN 603042 and DWC 605628, Canadian-built 52’-8” bulkhead flatcars (see the October 1990 issue of Railroad Model Craftsman Magazine for drawings and additional background) on the Rymal siding. The duo is loaded with drywall for ‘Ferrell Builders Supply’ an area materials provider. The concrete grain silo structure in the foreground is believed to have been constructed just prior to World War II, several years ahead of the adjacent CO-OP installation. The silo complex was built by the owner of the neighbouring Binbrook Feed Mill operation. Storage space was also leased to other enterprises, including the nearby Hannon Feed Mill. Operation of the silo complex would have most likely continued into the mid 1960’s, just prior to the widespread use of large volume covered hopper cars for grain transport. The low volume operation was set up for boxcar grain delivery. Undoubtedly, the improved highway system and truck transport rendered the facility redundant to local area needs. Incredibly, the concrete structure is still sound with the interior mostly preserved - the vertical wooden bucket elevator and much of the original woodwork are still solidly in place. It’s like the owner just walked away one day!

Wordless Wednesday #23

Throwback Thursday #18 - CN GP9 #4521 at Rymal Siding, Part 1

Tonight's Throwback Thursday features another article by my Dad, Keith. I've been meaning to explain the significance of why I named this blog "Rymal Station" (can't recall if I have already), but hopefully this will help explain it. Part 2 to follow. Thanks Dad!

- Peter.

CN GP9 #4521 at Rymal in 1979

An early summer evening finds a pocket-sized Canadian National wayfreight pausing to retrieve an empty bulkhead flatcar from the CO-OP siding at Rymal, situated in the Southern Ontario hamlet of Hannon. Hannon, while not a locality ever identified on any map, was situated just above the Niagara Escarpment on Hamilton Mountain (as referred to by ‘Hamiltonians’). The CNR branchline is the former Hamilton and Northwestern Railway ROW built to link Hamilton with the Lake Erie community of Port Dover. After coupling up and performing the requisite brake test, the tidy consist will trundle northward, cautiously descend along the previously-mentioned geographical feature, cross over the T, H & B main line and swing onto Ferguson Avenue to do some street running prior to entering Stuart Street yard located along the Hamilton waterfront. Out of frame, at the head end is CN GP9 4521, with the following consist in tow:

- bulkhead flat car (CN 606000 series)

- 89 ft flat car (CN 668091 – built 12/1975)

- 40 ft single door boxcar (BN 199778)

- 40 ft livestock car (CN 810189)

- 50 ft MOW tie gondola (CN 60223)

- Pointe St. Charles Caboose (CN 79800 series)

The collection of buildings (except for the cylindrical concrete silos located behind the tall structure on the right) is part of what once was known as the ‘Ancaster CO-OP’. Constructed in the mid 1940’s following the conclusion of WW II hostilities, the farm, feed and hardware supply enterprise was geographically misnamed by design. The long term plan by the original share contributing owners was to relocate to the neighboring named community once an alternative to rail supplied raw materials could be organized. No doubt the expanding local highway system and truck transport were the anticipated methodology. However, such plans never materialized and today, after serving in their original intended purpose for decades, the structures shown still exist and have been incorporated into a thriving Home Hardware installation.

The fate of the Canadian National branchline? Despite a daily Hamilton-Nanticoke steel slab train that gained the line fame in its' later days, the former H&NW line suffered from diminishing traffic into the early 1990’s, and would eventually be lifted in 1993. Service south from Hamilton would be suspended in the late 1980’s following the lateral displacement of the Stone Church road overpass (in both directions!) by transport truck collision. Today, much of the ROW remains as the ‘STONE CHURCH ROAD RAIL TRAIL’.

Stay tuned for Part 2 to follow.

- Keith.

GP9 CN 4521 (GMD London 12/1956) was rebuilt by CN Pointe Ste. Charles as GPRM 7007 in 1985. Following some fifty-seven years (!!!) of service on the home road she would be conveyed to Motive Power Resources Inc. (http://www.mprxinc.com/index.htm) and renumbered MVPX 7007. Doubtful she will enjoy similar longevity with her new owner.

According to on line information, BN 199778 was originally from CB&Q XM-32C series Nos. 18400 – 19399. The 40 Ft. boxcars were constructed by the railroad at their Havelock, Nebraska shops in 1950/1951 from components supplied by Youngstown Steel Door Co. and Standard Railway Equipment. Note the improved Dreadnaught ends with the rectangular top rib. Modifications in a BN rebuild program involved, roof walk removal, shortened ladders, wider 10 Ft. door (w/reinforced opening) and converted roller bearing trucks. Similar to CN 4521, doubtful she enjoyed similar longevity with her second owner.

CN stock car No. 810189 is most likely being used for tie storage and transport - note the haphazard pattern of side strapping repairs and ability to see randomly through the car. This car was from a group of two hundred converted in 1965 from 503500-505850 series wood side (all metal Hutchins roof with Dreadnought steel ends) boxcars. By the early 1980’s Canadian National’s population of stock cars had dwindled to less than 250.

Although the principle CO-OP structures remain, much change to the landscape has occurred over the intervening 36 years. The weed and brush filled field has been consumed by a substantial garden and soil supply enterprise (hence the elevated earthen vantage point). While whitewash has replaced the classic CO-OP cream trimmed by hunter green colour scheme, one can still buy hardware items. However, the only available feed, is for pets.

Wordless Wednesday #22